Request a quote

Dehydrated Ethanol

Essentica produces dehydrated ethyl alcohol – a purified form of neutral ethanol with a minimum alcohol content of 99.9% m/m. The product is used as an additive in fuels, as well as in industries where even traces of moisture are unacceptable, for example in cleaning electronics, and in pharmaceuticals and cosmetics.

Essentica's dehydrated ethanol meets the requirements of Regulation (EU) 2019/787 on ethyl alcohol of agricultural origin, as amended by Delegated Regulation (EU) 2022/1303, and is classified under HS tariff code 2207.10.

As non-denatured alcohol, it is an excise good under Directive 92/83/EEC and Art. 2(1) of the Excise Duties and Tax Warehouses Act. Movement between member states follows Directive (EU) 2020/262, and the recipient must be a licensed warehouse keeper or registered consignee. For deliveries outside the EU, the product leaves customs territory under the "export" procedure, and the requirements for the recipient are set by the legislation of the destination country.

Quality standards and registrations

  • ISO

Additional information

Even traces of moisture can cause phase separation when ethanol is blended with gasoline or other non-polar solvents. The low water content of Essentica's dehydrated ethanol eliminates this risk.

The product is produced non-denatured, but can be denatured to order using any of the methods offered by Essentica: the common EU method, the nationally approved formulas, or the individually approved combinations under Art. 98a.

Dehydrated ethanol goes into production after a specific order is confirmed, including the volume and whether denaturing is included.

Organoleptic properties

Dehydrated ethanol minimum 99.9% m/m
Parameter Specification
Appearance and color A colorless, clear liquid with glitter, not containing solid particles and sediments

Physicochemical properties

Dehydrated ethanol minimum 99.9% m/m
Parameter Expressed as Limit
Ethanol + higher saturated alcohols %m/m Min. 99.9
Higher alcohols %m/m Max. 0.2
Methanol %m/m Max. 0.1
Water content %m/m Max. 0.100
Total acidity %m/m Max. 0.0035
Electrical conductivity μS/cm Max. 2.5
Inorganic chlorides content mg/kg Max. 1.5
Sulfates content mg/kg Max. 3.0
Copper content mg/kg Max. 0.100
Phosphorus content mg/l Max. 0.15
Non-volatile matter content mg/l Max. 5
Sulfur content mg/kg Max. 5

Why choose us?

  • Essentica is a manufacturer with its own plant and warehouse capacity, independent of third-party supplies.
  • All of our ethanol production is certified to ISO 9001 and KOSHER, and ethyl alcohol as an active pharmaceutical ingredient also meets the requirements of EudraLex Volume 4, Part II (EU GMP), based on the international ICH Q7 guideline. The quality and safety of DDGS are confirmed through the HACCP system.
  • Every batch of goods is checked against the parameters in its specification – physicochemical, organoleptic, and for some also microbiological, including the absence of undesirable substances. Each batch is tested individually, and the results confirm consistent quality.
  • We produce a wide range of neutral, denatured and dehydrated ethanol, in multiple formulas for different markets and end uses.
  • Every product meets all mandatory regulatory requirements for its class and market of application.
  • Internationally recognized certifications save the buyer time and resources on their own audits, and speed up our approval as a supplier.

Frequently Asked Questions

Mainly in fuel production and in processes where even traces of water interfere – cleaning electronic components, as a solvent in paints, varnishes and inks, in pharmaceutical and cosmetic manufacturing processes, and in the maintenance of precision equipment and optics in the defense industry.
Standard and Premium ethanol have a minimum alcohol content of 96.0% vol., while dehydrated ethanol reaches a minimum of 99.9% m/m, with water limited to 0.100% m/m. The choice depends on whether the end application requires that low a level of moisture.
Yes, on request – using any of the methods applied to Essentica's other products: the common EU method, the nationally approved TBA or IPA formulas, or one of the individually approved combinations under Art. 98a.
As non-denatured alcohol, it is an excise good – the recipient must be a licensed warehouse keeper or registered consignee under Directive (EU) 2020/262. If the order is for a denatured version under an individually approved formula, prior coordination with the Bulgarian Customs Agency for the specific destination is also required.
By 30 000L tanker or 1000L IBC container. IBC containers are moved by road or by sea in 20- or 40-foot containers. For more distant destinations, delivery by ISO container, suitable for intermodal transport, is also possible. Transport of ethanol is always carried out under ADR (UN1170, Class 3, Packing Group II).
Every delivery is accompanied by a certificate of analysis and the necessary commercial and excise documents. The safety data sheet and the trade specification are available for download on this page.
Yes. Essentica exports its products to more than 30 markets worldwide. For a denatured version under an individually approved formula, delivery outside Bulgaria also involves approval of the method by the competent customs authority of the destination country.
Determined individually based on volume and whether denaturing is included – contact our sales team for the specific terms.
Sample availability is assessed individually for each request – contact our sales team to discuss the details.
Fill in the inquiry form with as much detail as possible – product type, required quantity, destination and delivery frequency. Our sales team will contact you based on the information provided.

Request a quote

The more details you provide regarding product specifications, volume, destination, and delivery schedule, the faster our sales team can prepare your quote.

  • Direct manufacturer contact
  • Response within 1 business day
  • Samples available upon request
  • * Required Fields

Types of ethanol we offer

Ethanol

Ethyl alcohol of agricultural origin with a clean, neutral profile, produced through multi-stage distillation and rectification.

  • See more
Ethanol API

Non-denatured ethyl alcohol produced as an active pharmaceutical ingredient, in line with Ph. Eur. monograph 1317 and EU GMP requirements.

  • See more
Completely Denatured Ethanol

Denatured with 1 l/hl isopropyl alcohol, 1 l/hl methyl ethyl ketone and 1 g/hl Bitrex under the common EU method, recognized across every member state.

  • See more
Denatured Ethanol TBA + Bitrex

Denatured with 78 g/hl tert-butyl alcohol and 0.8 g/hl Bitrex under a nationally approved method, also available in two further concentrations.

  • See more
Denatured Ethanol IPA

Denatured with isopropyl alcohol under a nationally approved method, offered in three concentrations from 2 to 5 l/hl.

  • See more
Denatured Ethanol IPA + Bitrex

Denatured with 2 l/hl isopropyl alcohol and 1 g/hl Bitrex under an individually approved formula, agreed for each destination market.

  • See more
Denatured Ethanol IPA + TBA

Denatured with 5 l/hl isopropyl alcohol and 78 g/hl tert-butyl alcohol under an individually approved formula, without a bittering agent.

  • See more
Denatured Ethanol Bitrex

Denatured with 1 g/hl Bitrex alone under an individually approved formula, using a single bittering agent and no added solvent.

  • See more
Denatured Ethanol DEP + Bitrex

Denatured with 0.3 l/hl diethyl phthalate and 0.2 g/hl Bitrex under an individually approved formula, in the lowest doses of the range.

  • See more
Denatured Ethanol Ketone Mix + Bitrex

Denatured with a 1 l/hl blend of three ketones and 1 g/hl Bitrex under an individually approved formula, agreed for each destination market.

  • See more
Denatured Ethanol MEK

Denatured with 1.25 l/hl methyl ethyl ketone alone under an individually approved formula, using a single denaturing agent.

  • See more
1 11