Ethanol API
Essentica produces ethyl alcohol of agricultural origin with an alcohol content of 95.1–96.9% vol., as an active pharmaceutical ingredient (API), in accordance with the requirements of GMP and monograph 1317 of the European Pharmacopoeia (Ph. Eur.). It is used in the pharmaceutical industry for the manufacture of medicinal products for human use.
Essentica complies with the requirements of EudraLex Volume 4, Part II – the European standard for good manufacturing practice applicable to active substances used as starting materials for medicinal products. It is based on ICH Q7, the international guideline on good manufacturing practice for active pharmaceutical ingredients. Compliance is confirmed through regulatory inspections and audits, and the competent authority in Bulgaria is the Bulgarian Drug Agency. The product is classified under HS tariff code 2207.10.
As non-denatured alcohol, it is an excise good under Directive 92/83/EEC and Art. 2(1) of the Excise Duties and Tax Warehouses Act. Movement between member states follows Directive (EU) 2020/262, and the recipient must be a licensed warehouse keeper or registered consignee. For deliveries outside the EU, the product leaves customs territory under the "export" procedure, and the requirements for the recipient are set by the legislation of the destination country.
Quality standards and registrations
- ISO
- GMP
Industries
Additional information
Grain enters the plant as a raw material and leaves as the finished active ingredient, with no stage outsourced to a third party. Fermentation, distillation, rectification, storage and loading all take place at the same site. For the buyer, this shortens the supply chain whose compliance with good manufacturing and distribution practices they are required to confirm under Article 46(f) of Directive 2001/83/EC. Between the field and the tanker, there is no intermediate processor whose records and certificates would need to be requested separately during an audit.
Each batch is produced independently and carries its own unique number, which follows the shipment to the recipient. Before release, the goods undergo physicochemical and microbiological testing against the approved specification. The accompanying certificate of analysis contains the actual measured values for that specific batch, not the general permitted limits. The production schedule is planned around the volumes pre-agreed with customers.
The active pharmaceutical ingredient is manufactured in Bulgaria, under the supervision of the Bulgarian Drug Agency. The production site falls under the member states' risk-based inspection system pursuant to Article 111 of Directive 2001/83/EC. Importing an active substance from a third country requires the payment of customs duties, as well as written confirmation of GMP equivalence under Article 46b(2). Both burdens fall away with an intra-Community delivery from Essentica.
Physicochemical and Microbiological properties
Ethanol as an active pharmaceutical ingredient
| Parameter | Unit | Limit per Ph. Eur. |
|---|---|---|
| Alcohol content | % V/V at 20°C | 95.1–96.9 |
| Relative density | - | 0.805–0.812 |
| Appearance | - | Colorless, clear, volatile, flammable, hygroscopic liquid |
| Solubility | - | Miscible with water and methylene chloride |
| Identification | - | Complies with the tests |
| Appearance of solution | - | The solution is clear and colorless |
| Acidity/alkalinity | ppm | maximum 30, expressed as acetic acid (CH3COOH) |
| Residue on evaporation | ppm m/V | maximum 25 |
| Absorbance: | ||
| at 240 nm | - | maximum 0.40 |
| from 250 to 260 nm | maximum 0.30 | |
| from 270 to 340 nm | maximum 0.10 | |
| Volatile impurities: | ||
| Methanol | ppm V/V | maximum 200 |
| Acetaldehyde and acetal (expressed as acetaldehyde) | maximum 10 | |
| Benzene | maximum 2 | |
| Total of other impurities | maximum 300 | |
| Microbiological quality: | ||
| TAMC | CFU/ml | maximum 10³ |
| TYMC | maximum 10² | |
Controlled logistics process
Traceability, safety and reliability in ethanol transport.
Why choose us?
- Essentica is a manufacturer with its own plant and warehouse capacity, independent of third-party supplies.
- All of our ethanol production is certified to ISO 9001 and KOSHER, and ethyl alcohol as an active pharmaceutical ingredient also meets the requirements of EudraLex Volume 4, Part II (EU GMP), based on the international ICH Q7 guideline. The quality and safety of DDGS are confirmed through the HACCP system.
- Every batch of goods is checked against the parameters in its specification – physicochemical, organoleptic, and for some also microbiological, including the absence of undesirable substances. Each batch is tested individually, and the results confirm consistent quality.
- We produce a wide range of neutral, denatured and dehydrated ethanol, in multiple formulas for different markets and end uses.
- Every product meets all mandatory regulatory requirements for its class and market of application.
- Internationally recognized certifications save the buyer time and resources on their own audits, and speed up our approval as a supplier.
Frequently Asked Questions
Request a quote
The more details you provide regarding product specifications, volume, destination, and delivery schedule, the faster our sales team can prepare your quote.
- Direct manufacturer contact
- Response within 1 business day
- Samples available upon request
Types of ethanol we offer
Ethyl alcohol of agricultural origin with a clean, neutral profile, produced through multi-stage distillation and rectification.
- See more
Denatured with 1 l/hl isopropyl alcohol, 1 l/hl methyl ethyl ketone and 1 g/hl Bitrex under the common EU method, recognized across every member state.
- See more
Denatured with 78 g/hl tert-butyl alcohol and 0.8 g/hl Bitrex under a nationally approved method, also available in two further concentrations.
- See more
Denatured with isopropyl alcohol under a nationally approved method, offered in three concentrations from 2 to 5 l/hl.
- See more
Denatured with 2 l/hl isopropyl alcohol and 1 g/hl Bitrex under an individually approved formula, agreed for each destination market.
- See more
Denatured with 5 l/hl isopropyl alcohol and 78 g/hl tert-butyl alcohol under an individually approved formula, without a bittering agent.
- See more
Denatured with 1 g/hl Bitrex alone under an individually approved formula, using a single bittering agent and no added solvent.
- See more
Denatured with 0.3 l/hl diethyl phthalate and 0.2 g/hl Bitrex under an individually approved formula, in the lowest doses of the range.
- See more
Denatured with a 1 l/hl blend of three ketones and 1 g/hl Bitrex under an individually approved formula, agreed for each destination market.
- See more
Denatured with 1.25 l/hl methyl ethyl ketone alone under an individually approved formula, using a single denaturing agent.
- See more
Further purified ethyl alcohol with a minimum alcohol content of 99.9% m/m and water content up to 0.100% m/m, made to order and available denatured by any method.
- See more